More progress on the @joepanhead1313 Sportster clone. Been working towards closing in the neck area for moulding. Bent up by hand some 3/16” round bar for the two outside edges and the center peak. Then bent up by hand some sheet metal to fill the gaps to only have a small amount of bondo take up the rest. Next is side plates but I’ll do that once the bike is stripped. Also finished up the lunch box oil tank mount. The original mount was cut. However, thanks to @24ouncepbr and some photos of his fathers original ‘69 XLCH I was able to copy the mount and cut it out of a piece of square tubing and weld it in. Up next is finishing the rear fender, seat, sissybar mount. Getting closer to paint and chrome!

via Instagram